Additive Manufacturing

HP Jet Fusion Delivers Injection Mold Quality without the Mold

3D printed part

3D printed part

Mold no more!  For small and medium-batch production runs, slash cut part cost and accelerate delivery speed with HP Jet Fusion:

  • No tooling costs
  • Limitless iterations
  • Design freedom
  • Lower engineering costs
  • Collapsed delivery timelines
  • Production-quality parts

Contact us for a quote.

RapidMade Helps Firms Complete Year-End Project in Days, Not Months...

Thermoform+styrene+tray+gif.gif

Every holiday season, purchasing agents and design engineers everywhere feel pressure to complete capital projects before they can celebrate the New Year.  Who wants to forfeit hard-earned budget allocations because time constraints prevent delivery before the 2018 count down?  Make your holidays happy instead.

Thanks to Additive Manufacturing (3D printing), year-end projects can be completed in days, not months.  Services include:

  • Rapid Prototyping
  • 3D Scanning
  • Production Parts
  • Thermoformed Products
  • Reverse Engineering 
  • Industrial Patterns
  • Printed and Machined Tooling
  • Custom Displays, Exhibits and Promotions
  • Engineering Design

Additive Manufacturing benefits:

  • Short lead times
  • No tooling costs
  • High customization
  • Small-batch production
  • Eliminated design limitations
  • Pre-built assemblies
  • Reduced structural weight

 

HP Announces New 3D Printing Materials for 4200 Jet Fusion Series

RapidMade's HP Jet Fusion in action

RapidMade's HP Jet Fusion in action

RapidMade is pleased to share that HP is expanding material options for its Jet Fusion 3D printer.  Recognizing that material selection, performance, quality and cost have been barriers to additive manufacturing adoption, HP has focused aggressively on product development and accessibility.

Now, in addition to its 3D High Reusability PA 12, HP plans to offer:

  • 3D High Reusability PA 12 Glass Beads - designed to produce "stiff, low-cost, quality parts"
  • 3D High Reusability PA 11 - formulated to create "ductile, quality parts" at an unbeatable price

A key to its speed-to-market success has been HP's decision to encourage an Open Platform where key suppliers collaborate to accelerate material innovation.

RapidMade looks forward to including these revolutionary nylon powders in its operations.

RapidMade Brings Goodnuss to Founder and Other Entrepreneurs

Goodnuss 1.png

One of the most enjoyable aspects of working with entrepreneurs is seeing them – and their projects – come to fruition, orin Lizz Hampton’s case – to nutrition!  Lizz is one of our favorite success stories, especially given that she is among RapidMade’s first customers, dating back to its first year in business.

Lizz came to us with a product idea that would make it easier for people to make fresh nut milk at home. The product concept itself was very simple, however the design requirements were very complex.

Over the course of the past 4 years, we have worked with Lizz to simplify this revolutionary product through hundreds of prototype iterations, helping her streamline from more than 15 complex parts down to 4 simple parts and then supporting her pivot away from a device into a reusable, mess-free nut milk bag.

Goodnuss 2.png
Goodnuss 3.png
I wouldn’t have been able to get this far without Micah and his team at RapidMade. Not only did they help me develop a better product, they provided essential insight into how it would need to be manufactured, important engineering considerations and top quality parts for my prototypes. Above all else, they have been there to support me on my journey and believe in the product I am creating, which is invaluable to me as a young maker/designer.
— Lizz Hampton, Goodnuss Founder
Goodnuss 4.png

As of October 17th, Lizz’s reusable, mess-free nut milk bag is available for pre-order on Indiegogo. We are helping her spread the word about her launch because we believe in supporting our customers and doing our part to help them succeed.  If you are interested in supporting Lizz and helping her get her product manufactured, please click this link

You can also check out her website, which is full of funny videos.

If you are not a nut milk drinker, we’re sure you know someone who is and would love this product!  If you are not able to support her campaign financially, please share with your network so she can build her dream company.

Goodnuss 5.png

At RapidMade, we believe in helping our customers achieve their goals, whether it’s developing or producing a product for commercial use, creating a prototype for an entrepreneurial project or making displays for retail spaces, we are dedicated to helping our customers succeed with superior products.

RapidMade Announces HP Multi Jet Fusion Services

IMG_20171005_115643405.jpg

In honor of National Manufacturing Day 2017, RapidMade demonstrates commitment to continuously invest in technology, training and increase our knowledge of advanced manufacturing techniques.

October 5, 2017: RapidMade announced today it is offering services based on HP’s award- winning Multi Jet Fusion technology. Based in Portland, Oregon, RapidMade offers customers expertise on materials, engineering and manufacturing processes including advanced technologies like 3D printing. On the heels of its move into a larger facility to increase capacity for larger clients, the company is delivering on its promise to expand its capabilities and invest in new technology such as HP’s Jet Fusion 3D 4200 printing solution.

“With National Manufacturing Day coming up on Friday, October 6, it is worth reflecting on our goal when we founded RapidMade in 2011,” said Renee Eaton, RapidMade CEO. “We felt there was an opportunity to capitalize on the growing additive manufacturing market, sustainably localize manufacturing and do our part to employ and educate a new generation of manufacturing professionals. The addition of transformational technologies such as HP’s Multi Jet Fusion is at the forefront of our mission.”

“We share HP’s vision for the digital transformation of manufacturing, and as we look to help our clients compete in the digital age, we are so excited about the capabilities of HP Multi Jet Fusion,” added Eaton. “Whether our customers are looking for design support, prototyping or more complex projects, the quality, speed and cost savings enabled by the Jet Fusion 3D 4200 solution will deliver.”

The HP Jet Fusion 3D 4200 solution lowers the barriers of entry to additive manufacturing by providing faster build speeds, high-quality functional parts, and breakthrough economics. The HP Jet Fusion 3D 4200 machine operates through a unique Multi-Agent printing process, offering dimensional accuracy, fine aesthetics, and superior mechanical properties. Parts can currently be printed in High Reusability PA 12. Additional materials will be available as the largest chemical companies in the world develop certified materials for HP’s Open Materials Platform, providing customers with an ever-growing portfolio of materials for different applications.  

About RapidMade

Based in Portland, Oregon, RapidMade’s knowledge of materials, engineering and manufacturing processes extends to both traditional and advanced technologies. We like to design and build things, and we like to work with clients who feel the same way. We believe that our customers’ competitive advantage stems from their ability to create, produce and market better products. That’s why we focus on applying the latest materials, manufacturing and engineering technologies to the process of developing, prototyping, manufacturing, and marketing products. And we use this knowledge to help our clients apply the right solutions to their business needs. If you are looking to create a new product, improve an existing one, find a new manufacturing solution or want a partner who can help you take advantage of the latest digital and additive technologies then we can provide you with a range of services from a simple part or prototype to a complete analysis of your product or processing needs. It is this focus and passion, together with our ability to provide these services in a unique and cost effective way, that makes us different. 

Contact RapidMade to learn more:

To request a quote, submit a Quick Quote, or email RapidMade at info@rapidmade.com.

 

RapidMade Clients Named PBJ Small Business & Innovation Award Winners

Congratulations to Innovarai and Madorra Medical who are among Portland Business Journal's 2017 Small Business & Innovation awardees!  Their achievements will be recognized and their products showcased on November 1st from 5:30 p.m. - 7:30 p.m. at the Portland Hilton Hotel.

Rapid prototyping and low-volume production, made possible through 3D printing (additive manufacturing), are lowering the barriers to entry for entrepreneurs and start ups.  These advanced manufacturing technologies lower costs, reduce lead times, and optimize designs, making product launches more affordable and timely.

There's a New HAAS in Town!

Our new HAAS CNC machine is "sitting pretty" in our new location.

Our new HAAS CNC machine is "sitting pretty" in our new location.

The Tigard location is filling up quickly.  Both our HP Jet Fusion and HAAS CNC machines were delivered this week.  And they're being installed as this post is being written.  RapidMade is on track to move in and start up operations on August 1 as planned.  Help us fill up our new and existing equipment.

Hometown Pittsburgh's High-Tech Make Over...

Growing up in Pittsburgh, if you weren't directly connected to the Steel industry, you complained about the rotten egg smell and pollution.  But when the industrial giants went silent in the 70s and 80s, the complaints shifted dramatically to the economic tragedy that was unfolding - the flight of life-long residents and well-paying jobs.   Rhetoric from the recent election aside, Pittsburgh's manufacturing base is both alive and well...

The Pittsburgh Regional Alliance (PRA) recently reported that in 2016 the manufacturing sector accounted for the most investment dollars ($6.1 billion), the most deals (50 companies expanding or relocating), and the most new and retained jobs (3,667).

But as we've continued to see, the type and number of jobs that have been created don't resemble those of the steel-era in any way.

“Manufacturing is the most active sector in southwestern Pennsylvania,” explains PRA President David Ruppersberger. “But as technology and automation continue to transform this legacy sector, the reality is that manufacturing facilities will be smaller-footprint, high-efficiency environments where fewer workers, with advanced skills including STEM proficiency, will produce more goods. This is a trend that won’t reverse at any time in the foreseeable future.”

Hearing of Pittsburgh's adoption of additive manufacturing and other advanced technologies is encouraging if the resulting economic turnaround benefits the greater community.

 

Now Get Nylon Parts Faster

FASTER NYLON PARTS – A New Age for 3D Printing

A RAPIDMADE WHITE PAPER

By Mark Eaton

Getting parts on demand has been a manufacturer’s dream for many years. Since 2005, see M. Park, UNSW article, there have been cries from the 3D printing industry that additive technology would replace the need for injection mold tooling, that it would eliminate the need for machining, that casting would become obsolete. Finally, that dream is becoming a reality.

While there have been success stories such as the use of Stratasys Ultem for aerospace parts and selective laser sintering (SLS) nylon for automotive parts, until today, these components have all had restrictions on where and how they could be used. One of the biggest drivers for this has been the speed and the part cost.  Siemens, according to a recent article in Plastics Today, is using 3D printed fire, smoke and toxicity-compliant polymers to replace parts in trams, and they cite part availability as being the primary driver. The US Marines have recently experimented with printing replacement Humvee parts in the field. What all these examples have in common is they are limited in scope by the 3D printing technology restrictions. While the FDM process eliminates tooling, it is still 100x slower than injection molding or machining, and while SLS material prices have been reduced, they are still 10x more expensive than injection molding or nylon bar stock prices. So, the extent to which these older 3D processes can be deployed is still limited by cost and speed.

                                                                 Photo Credit: HP

                                                                 Photo Credit: HP

 

This is beginning to change. A new breed of additive manufacturers is arriving on the market who are focused on truly using 3D printing to create production parts at costs comparable to injection molding and machining prices. These “new age” additive manufacturing companies combine faster printing technology with engineering resources to convert and certify part performance. They have integrated quality systems to ensure material, process and part conformity. And they offer parts at competitive prices compared to injection molding or machining costs without the need for tooling, set-up costs or inventory carrying costs. An example of one company taking advantage of this new age in additive manufacturing is Daimler, cited in a recent Reuters report, who has announced it will start offering plastic replacement parts printed at local service centers from a library of 3D files.

Driver’s armrest is 3D-printed from FST-compliant thermoplastic resin.Picture credit: PlasticsToday.com

Driver’s armrest is 3D-printed from FST-compliant thermoplastic resin.Picture credit: PlasticsToday.com

 

As an executive board member in the additive manufacturing community, I recently got to profile one such Portland-based 3D printing company, RapidMade. After 6 years developing prototyping, tooling and engineering services to support 3D printing, this company is reinventing itself to use the new breed of additive technology being offered by companies such as Hewlett Packard and Carbon 3D. These companies have developed much faster 3D printing technologies that use faster curing, less expensive materials with all the properties of traditional polymers. The new HP MJF is being showcased by RapidMade as part of its expansion in 2017. With speeds that are 10x faster than current SLS technology and material prices equivalent to injection molded nylon or machined bar stock, RapidMade can now offer its customers a wide range of new and replacement part solutions. Where precision tolerances are required, the company uses automated machining centers linked with the printers to provide finishing operations.

                                                                Photo Credit: HP

                                                                Photo Credit: HP

 

Without the need for tooling, customers can now order parts to print using their 3D library or one provided by the service provider. The shorter printing cycle times mean that it is no longer necessary to hold more than 1-2 days’ inventory for quick use parts, and less frequently used parts can be ordered as needed with zero inventory requirements. For very low order quantities (less than 10 parts), it has always generally been cheaper to 3D print versus using traditional manufacturing. With the lower cost breakeven point of these new age 3D printing technologies, minimum order quantities (MOQ) of 500 or 1,000 will be converted to printing versus injection molding or machining. For customers already using SLS technology, they will see an immediate cost and turnaround benefit from switching to this new breed of 3D printing technologies.

The benefit of these “new age” additive manufacturing companies like RapidMade is being immediately felt by the machinery manufacturers and end users of such equipment. There is a significant cost benefit in current supply chains, PWC Strategy& estimates there will be a 20% gain in TCO (total cost of ownership) from 3D printing replacement parts. It is estimated 70-80% of that can be delivered to the end users when they engage with a “new age” additive manufacturing company. Lower prices for spare and replacement parts are possible with piece of mind that the part has been certified for use. No longer are machinery manufacturers tied to traditional injection molders who retain tooling that cannot be easily moved. Parts produced offshore can now be re-shored without needing to recreate tooling. PWC Strategy& predicts German spare parts manufacturers will derive $3Bn in benefit from adopting 3D printing. Additive manufacturing by its nature is a non-labor intensive process, and the new breed of technologies produces 10x the number of parts in the same time lowering the overhead cost per part and making larger MOQ more attractive. Companies like RapidMade retain digital libraries and ship direct, on demand parts in quantities of 1 to 1,000 in less than 24 hours. They do this by not only having faster 3D printing technologies but also using automated transaction systems, integrated engineering and lean techniques to optimize printing uptime.

                                                                Photo Credit: PwC

                                                                Photo Credit: PwC

 

Whether it is Daimler, deciding to print plastic parts locally to save warehouse, shipping and logistics costs or Siemens citing the increased ability to service multiple customers with parts on demand, times are changing for the benefit of producers and end users. And to support the changing demands, these companies are turning to the ‘new age’ additive manufacturers who, in turn, are enabling US companies to re-shore production, improve turnaround time and lower part costs. If you have dismissed 3D printing in the past, it might be time to take another look.

Patients May Get Lucky "Break" with 3D Printed Plates Thanks to FDA Approval

My standard-issue wrist plate may soon be a thing of the past...

My standard-issue wrist plate may soon be a thing of the past...

When I shattered my wrist in 2014, the surgeon pieced together the fragments using a standard-issue, low-tech wrist plate and permanently screwed it into place.  Now, with the recent FDA approval of Additive Orthoapedics' 3D printed Locking Lattice Plating System, patients may soon have access to customized plates for "stabilization and fusion of fractures, osteotomies and arthrodesis of small bones."

‘We are excited to be one of the first companies to leverage the geometric flexibility, clinical advantages and manufacturing cost benefits of additive manufacturing in the orthopaedic plating market.  These plates can be implanted either alone with locking or non-locking screws, or in conjunction with our 3D printed bone segments through the use of a connection screw. This allows the surgeon to mix and match any wedge and plate combination for various deformities, complex revisions, or other limb salvage procedures,’ president Greg Kowalczyk said in a press release.

Since I have subsequently broken a foot and my other wrist, I will be sure to keep this company in mind, just in case.

 

 

3D Printed Shoes - A Great Fit for Adidas

Adidas' Futurecraft 4D (Reuters/Joe Penney)

Adidas' Futurecraft 4D (Reuters/Joe Penney)

It seems that 3D printed shoes are one step closer to reality.  This is a timely story for me as I just went shoe shopping this week...  Every time I need new tennis shoes, I go through the same routine:  choose from the limited selection of wide sizes and then, through process of elimination, find a pair that I can tolerate.  I speed walk, so the shoes have to be large enough to fit my feet but be snug enough to stay in place while I put them through their paces.  Based on this week's workout, the pair I just selected are not working out.  So I'm always interested in hearing about 3D printed shoes.

Adidas is apparently leading the pack pursuing a technology to allow mass produced custom shoes.  They announced a 

new partnership with Silicon Valley start-up Carbon (which) allows it to overcome many of those difficulties to produce a sole that can rival one made by an injection mould, and at a speed and price that allow for mass production.

The Futurecraft 4D shoe's introduction is planned for 2018 with the intention of offering shoe soles for individual fittings and limited editions.

The partnership with Carbon should allow Adidas to reduce the time it takes to produce shoes by additive manufacturing.  Its 3D printer design is reportedly 10 times faster than traditional 3D printer designs, printing soles in as little as 20 minutes.

 

Congratulations to Paper Packaging on Retirement After 53 Years in Business

Paper Packaging, Pittsburgh landmark, closes this week

Paper Packaging, Pittsburgh landmark, closes this week

This week, Paper Packaging closes after 53 years in business.  Why would RapidMade be marking this occasion you may ask?  Its founder, Dan Unico, who worked every day in 2D printing and box making, is the father/grandfather of three of RapidMade's owners.  

Dan, who also turned 90 this month, will continue to work along with his wife Joan, 85,  and two sons Ken and Mark to dismantle, crate and ship equipment to new owners.  In the spring, they anticipate - finally - retiring.  Maybe...  

Dan and Joan taught us that starting a business was - and is - a path to a better life. And we learned that lesson at an early age. As children, we would play in the factory, sometimes doing odd jobs until age and experience allowed us to "graduate" to working on the various print and die-cutting machines.  This was NOT additive manufacturing.  The work could be hard, dirty, and monotonous.

 It is a testament to Dan that his wife, three of his four children, one son-in-law and one of his grandchildren (so far) has chosen manufacturing as a career.  That is a legacy one can be proud of.  Happy Birthday and Happy Retirement!

congratulations!

congratulations!

When to Choose Injection Molding or 3D Printing

RapidMade Accelerates Pace and Elevates Quality of Product Launch

Injection Molding Case Study

3D Printing, or Rapid Prototyping as it is also known, is a much faster and cost effective solution for testing and perfecting digital designs. Its ability to fabricate parts overnight without any direct labor, programming or tooling means 3D printing technologies carry many advantages over traditional technologies like injection molding for short turns and small-batch production.

 Sometimes 3D printing only goes so far when developing and manufacturing products in their early stages. In those instances, Rapid Injection Molding can take products to the finish line.

An American-made LED light bulb manufacturer engineered a version that was bigger and brighter than its competition.  The company quickly learned that RapidMade's injection molding expertise could test, validate and even manufacture its light bulbs in ways that 3D Printing simply could not match.

RapidMade accelerates the typical injection molding process by providing a short cut between prototyping and production tooling. After the rapid prototyping client finalizes its product for injection molding, RapidMade creates a cheaper and better solution by making pre-final tooling out of aluminum. This option allows customers get to market sooner than other injection mold processes and helps gain customer feedback to improve products. Getting a product to market sooner generates more revenue to invest in further product development and long-term tooling. 

 Material

Since the customer didn't know what the final material of the bulb should be, cutting the mold and testing multiple materials, including different grades of ABS and Polycarbonate, helped pinpoint the final material and even helped estimate eventual mass manufacturing costs. Additionally, electronics products must go through rigorous UL testing to ensure consumer safety before the product can be sold in stores.

Color and clarity are other traits vital to the lighting industry.  Because 3D printers must run manufacturing-grade material that is unadulterated, optimizing these characteristics can be difficult. With injection molding, however, one can custom blend different clear and opaque pigments with clear plastic to prototype different levels of clarity and color. So the company could test very specific color profiles to perfect its formula in the final product.

 Finish

Finish is extremely important when working with lighting, as well as other consumer products. A matte finish diffuses light at a very different rate than a polished one. Due to the layered nature, inherent in the 3D printing process, even the highest detail machines will have some level of surface striation. Additionally, most filament or powder technologies will have a very rough finish beyond the layer lines. Achieving custom finishes requires polishing, sanding, and painting of each individual unit, making it is extremely labor intensive and expensive.

Alternatively, injection molding shoots molten plastic into a cavity which picks up the texture of that cavity. That means one only needs to finish a mold once to get repetitive shots of that finish. And molds can be polished and textured to prototype a variety of finishes before settling on the desired one.

Volume

A light bulb is a relatively low-cost consumer good. These goods are meant to be sold in large volume at low cost. Tooling to produce those volumes inexpensively enough can take months to make and require high upfront investment. Many businesses are interested in small and medium-batch options that are more cost effective and higher quality than 3D printing to excite investors, test markets and stoke demand. 

 The company secured a prototyping option with relatively little upfront investment that served as a bridge tool to get actual product out into the marketplace. Aside from the aforementioned quality concerns, this could not have been cost effectively achieved with 3D printing; one cannot sell a light bulb where the housings cost $38 to the manufacturer. Creating large volumes of parts on a 3D Printer can also take much longer than injection molding, making it harder to fill orders. Injection Molding can really provide exceptional value to early-stage manufacturers when producing runs of hundreds or thousands of parts for low cost very quickly.

 

Pittsburgh Bridge 3D Scanned to Produce Replicas - a Home Run in the Making

Our friends at Direct Dimensions in Owings Mills, Maryland, will be "creating a 3D CAD model" of the Roberto Clemente Bridge in our hometown of Pittsburgh, Pennsylvania.  The resulting files will then be used to create 3D prints of the bridge for an upcoming RAPID + TCT show being held in Pittsburgh in May.

Pittsburgh, long recognized for its sports accomplishments, is becoming well known as a Center of Excellence in Additive Manufacturing as well.



 

3D Printing (Additive Manufacturing) is a Family of Technologies

When we talk about 3D printing, it is a catch-all phrase that encompasses several distinct technologies, each with its own strengths.  Here are some comparisons of additive manufacturing options in plastic, metal and composites:

3D Printed Plastics

Fused Deposition Modeling (FDM)

Learn more about FDM

Standard Materials: ABS

Relative Cost: ★★☆☆☆

Machine Finish: ☆☆

ABS Prime Finish

Typical Lead Time:  2-5 Business Days

Specialty Materials: PC, nylon, ULTEM and many more (See FDM page)

Relative Cost: ★★★★☆

Machine Finish: ☆☆

Typical Lead Time: 3-7 Business Days

FDM Pros: Very high accuracy on large parts, diverse materials, rigid and tough, fast turnaround, sparse fill for light weight with high part volumes

FDM Cons: Striated machine finish, low resolution on features under 0.030"

Polyjet (Objet) Printing

Learn more about Polyjet

Standard Materials: Acrylic and polypropylene-like

Relative Cost: ★★★☆☆

Machine Finish: 

Typical Lead Time:  2-5 Business Days

Specialty Materials: ABS-like, various elastomers and digital materials (See Polyjet Page)

Relative Cost: ★★★★☆

Machine Finish: 

Typical Lead Time: 3-7 Business Days

Polyjet Pros: Top quality detail, best surface finish, clear material option, embedded textures, fine features, single piece mechanical assemblies

Polyjet Cons: Resins - not industrial thermoplastics, lower heat resistance, better for smaller parts

Selective Laser SIntering (SLS)

Learn more about SLS

Standard Materials: Nylon and glass filled nylon

Relative Cost*: ★★★☆☆

Machine Finish: ★★★☆☆

Typical Lead Time:  5-10 Business Days

Specialty Materials: Rubber (TPU), carbon filled nylon and other composites (See SLS page)

Relative Cost: ★★★★☆

Machine Finish: ★★★☆☆

Typical Lead Time: 5-10 Business Days

SLS Pros: Real thermoplastic and thermoplastic composites, uniform matte finish, great thermal and mechanical properties

SLS Cons: Large and thick parts can warp, longer production lead times, porous material, low resolution on features under 0.030"

*In volume SLS can become one of the least expensive printing processes.

Large Format 3D Printing

Learn More about Large Format 3D Printing

Standard Materials: Epoxy infused Acrylic

Relative Cost*: ★★★☆☆

Machine Finish: ★★★☆☆

Typical Lead Time:  5-10 Business Days

Specialty Materials: Sand (Sand Casting), Low Ash Burnout Resin (Investment Casting)

Relative Cost: ★★★☆☆

Machine Finish: ★★★☆☆

Typical Lead Time: 5-10 Business Days

Large Format Pros: Largest build size of any 3D printers, cost effective for large parts, casting patterns and molds without any additional tooling

Large Format Cons: Not as durable as SLS or FDM, not intended for small objects, longer production lead times compared to smaller printers

3D Printed Metals

Note: 3D printed metals tend to be 5 to 10 times the cost of 3D printed plastics and are often more expensive than machined metals.

Direct Metal Laser Sintering (DMLS)

Learn more about DMLS

Standard Materials: Aluminum, stainless steel, tool steel and titanium

Relative Cost: 

Machine Finish: ★★☆☆

Typical Lead Time:  5-15 Business Days

Specialty Materials: Cobalt chrome, inconel, (nickel alloy) and more (See DMLS page)

Relative Cost: 

Machine Finish: ★★★☆☆

Typical Lead Time: 5-15 Business Days

DMLS Pros: Stronger than cast parts, works with exotic and expensive to machine metals, can make parts that are otherwise not manufacturable

DMLS Cons: Limited part size (generally under 10"), rough finish, lower tolerance than machining, generally more expensive than machining

Printed Metal

Learn more about Printed Metal

Standard Materials: Stainless steel bronze alloy

Relative Cost: 

Machine Finish: ★★☆☆

Typical Lead Time:  10-20 Business Days

Specialty Materials: None

Relative Cost: N/A

Machine Finish: N/A

Typical Lead Time: N/A

Printed Metal Pros: Half to a third the cost of typical DMLS parts, beautiful bronze polish look, easily plated, larger bed than DMLS

Printed Metal Cons: Single available material, low strength to weight ratio for metal, long lead time relative to other 3D technologies

3D Printed Composites

Colorjet Full Color Composite

Learn more about Colorjet

Standard Materials: Full color composite

Relative Cost: ☆☆

Machine Finish: ★★☆☆

Typical Lead Time:  2-5 Business Days

Specialty Materials: None

Relative Cost: N/A

Machine Finish: N/A

Typical Lead Time: N/A

Full Color Composite Pros: Full gradient of 390,000 colors, generally least expensive material, fastest way to make large models, very rigid

Full Color Composite Cons: Features thinner than 0.100" can be brittle, does not have the flex of real plastic

 

RapidMade Helps SweetSense Make Life Sweeter for Residents in Kenya

RapidMade especially enjoys working on projects designed to improve the lives of others.  And we are thrilled when we get to see them "in action."  Recently SweetSense asked us to 3D print SLS parts that were used to produce remote sensors in Kenya that allow residents to better maintain water supplies and sanitary latrines.  

According to Taylor Sharpe, SweetSense is a "social enterprise" that is a spin-off of the Portland State SWEET Lab and partners with other agencies to provide high-tech solutions to problems faced by residents in developing countries.  

...in one case monitoring boreholes (deep water pumps that service 100s to 1000s of people) in Isiolo and Turkana counties in Kenya; and in the other case helping manage collection routines and operator issues of Sanergy Fresh Life latrines in the Mukuru informal settlements outside of Nairobi, Kenya.

For one of its initiatives, it has partnered with Sanergy to produce a

rugged enclosure that contains an occupancy sensor and am RFID reader, to respectively estimate the fill level of latrines before conversion to fertilizer and to give Fresh Life Operators a direct line of contact with Sanergy HQ in the case of emergencies.

In another, the Sat Spacer, SweetSense worked with Kenya RAPID...

RapidMade parts were used to allow SweetSense to provide satellite-based monitoring in areas with no cellular coverage.

Sieving Station Promotes "Cleaner" Metal Powder for 3D Printing

SIEVGEN 400-US:  Photo Credit - Farleygreene

SIEVGEN 400-US:  Photo Credit - Farleygreene

When I worked for Nabisco, we had large robust sieves that would prepare flour being drawn from our 7-story flour towers prior to discharging into the weigh scales and mixers - several hundred pounds each batch.  The contraptions looked like very large metal boxes that shook and rotated violently to sieve the flour.  So it makes sense to me that a similar process would be recommended to pre-treat metal powders before being sintered into a 3D print.

In fact, a couple of challenges using powders in manufacturing processes are material purity and particle size. Apparently Farleygreene has introduced its SIEVGEN 400-US specifically to address these concerns for DMLS additive manufacturing.

According to Farleygreene, when in normal use the system provides for a completely sealed and dust tight process. The feed hopper is docked into place to feed the sieve unit with a self-sealing interface and the media is introduced through an internal metering device designed to ensure the optimum screen dwell time to recover as much useable material as possible.

Oversize powder is continuously removed and ‘good’ product falls through the ultrasonically excited mesh. The screened media is filled into a receptacle locked into place on a mobile dolly to reduce manual handling as much as possible and allow the operator to move the product to where it is required.

When you are hitting a potentially explosive metal powder with a laser, powder consistency and purity are obviously important material attributes to control.

 

3D Printing Great Tool for Displays, Exhibits and Promotions

Development model shown to Portland city council for project approval.

Development model shown to Portland city council for project approval.

Capture the imagination of your Customers and Patrons with Unique Displays:

Architecture

  • Turn around in as little as 24 hours means more time to perfect your designs.
  • Embedded textures lets you simulate the colors of building materials like brick, stone and wood.
  • Small features lets you design realistic windows, doors, beams, facades and other important visual design elements.
  • Prints come directly from your BIM models.

Marketing

  • Get your products in front of customers where it would otherwise be difficult or impossible.
  • Customize marketing materials with logos and designs.
  • Infinite customization to achieve the exact effects you desire.
  • Get concept models in front of customers early in the product development cycle to get feedback before spending too much money on the wrong track.
  • Get tangible products in your customers hands instead of a 2D computer image.

Promotions

  • Pens and magnets are boring and forgettable. Make a promotional giveaway your customer has never before seen.
  • Come to us with nothing but an idea for a promotional product and we can take care of the rest.
  • Personalize your giveaways to the exact customer you are handing it to with custom messaging.
  • Many promotional products require expensive tooling and long lead times to accomplish - RapidMade can make your promotional products in a week or less.

Displays

  • Drive traffic to your stores at the window and sales with custom retail displays.
  • Stand out and get attention at your next trade show with eye catching models.
  • Capture your customers' attention and make them remember your brand
  • Lean on our design team to come up with a creative solution that will satisfy your customers and be flexible for your budget.

 

Exhibits

  • Store geometric and color data for priceless artifacts and works of art permanently with 3D scanning technology.
  • Use digital object data to engage visitors online with interactive web exhibits.
  • Create to-scale or re-scale replicas that let your visitors safely interact with models of priceless artifacts without endangering the original piece.
  • Create complimentary pieces for your exhibit from object data scanned by other museums around the world.

RapidMade Advantages:

  • Color: with almost 400,000 colors to choose from, why skimp?
  • Size: scale-down huge machines or buildings to hand-held or table-sized replicas
  • Logistics: avoid lugging heavy machinery to trade shows
  • Creativity: turn your BIM and CAD models into tangible marketing materials
  • Carefree: leave the design and fabrication to us, just supply the ideas

OMDOG Performance Canine Headgear Lets Your Dog Ride Safely in Style

RapidMade gets to work on many cool new product ideas.  Given our love of dogs - we have a dog-friendly workplace, this project has been a favorite...

"OMDOG performance canine headgear started as a simple idea — to build a custom helmet for Charlie the Dog, who rides around Portland, Oregon in a cargo bicycle. When the decision was made to duplicate and improve the design, we contacted Rapid Made. They were responsive and excited about the project. They quickly 3D scanned our prototype, reverse engineered it, and made it easy for us to review and approve the CAD model before printing. Rapid Made helped us take an idea that started as a cardboard model made from a pizza box turn it into a viable product design. They're providing us with manufacturing options within our budget and well suited for our target market. We are extraordinarily grateful to have found Rapid Made!"

The Deadliest Cast - 3D Scanning, 3D Printing and Manufacturing Crabs

 
Click image to read case study.

Click image to read case study.

One of the juicier projects we've had involved 3D scanning real 10-lb crabs to recreate life-like replicas for Bering Sea Crab Fisherman's Tour.  The captain and his crew take tourists out on the high seas in the summer to watch them work.  Unfortunately, they were losing much of their inventory recreating their catches - this was both costly and unsustainable.

Once we 3D scanned the real thing, we 3D printed a master pattern which was used to create a mold.  The mold allowed RapidMade to cast the crab look alikes in urethane rubber.  See the results here.